Education Qualification

B.E/BTech/ in E & CE, E & E or Instrumentation

Years of experience

8 to 10 years

Work Location

Bangalore

No of Positions

2

Key skills/Job Responsibilities

• Experience in Hardware circuit design involving Microcontrollers, Microprocessors and PLDs.
• Familiarity with power supply design using DC-DC and AC-DC converters. (Analog digital)
• Knowledge of implementing signal conditioning and protection circuits for Analog and Digital IOs.
• Should know schematic design tools and be able to guide PCB design Engineers during the PCB layout.

Tool Knowledge

Orcad, Spice tools, Matlab, Hardware Emulators and Debuggers (any 2)

Board Bring Up

Able to write test drivers to test H/W interfaces for Linux and uboot.

Testing

Trouble shooting of digtial and analog boards, Board level testing, Box level testing and environmental testing.

General

• Familiarity with High Level Design, Design Analysis, Simulations, Testing methodologies, Derating, worst case analysis is a must.
• Familiarity with Design requirements to meet Environmental and EMI/EMC tests as per DO160, MIL810F and MIL 461E standard is desired.

Job may involve travel short-term and long-term travel to UK, US, Europe and within India.

Employment Type

Regular / permanent.

Selection Process

Online/F2F interviews + HR interviews (Shortlisted)

Education Qualification

BE/BTech (CSE, IT, Electrical & Electronics)

Years of experience

1 to 5 years

Work Location

Bangalore

Key skills/Job Responsibilities

• Required System knowledge (ARM processor, CPU Registers, Interrupt, Memory etc) (Basic Idea)
• Knowledge of Arm Architecture
• Experience in assembly language and ASM instructions
• Knowledge of Software testing concepts (Unit testing, MCDC and Integration testing)
• Experience in C Language
• Experience in OS concepts
• Arm Architecture( ARM V7, CPU Registers, Modes, Exceptions, Memory etc )
• At least one project with assembly language experience
• Able to explain the project picked by them( they pick project relevant to them).
• Able to answer all the questions asked regarding the project in detail.
• Memory concepts(RAM,Cache,Flash)

Position

3

Education Qualification

BE/BTech (CSE, IT, Electrical & Electronics)

Years of experience

1 to 5 years

Work Location

Bangalore

Position

3

Key skills/Job Responsibilities

• Very Good understanding of Microprocessor/ Microcontroller Architecture ( ARM/Intel/AMD)
• Very Good understanding of communication interfaces like UART, Ethernet, SPI, I2C etc.,
• Experience of Linux Boot up sequence/ BSPs and board bring up activities
• Experience in Linux Kernel and Device Driver Development
• Application development in an embedded Linux environment in C or C++.
• Experience in building Linux Kernel using BuildRoot/Yacto
• Very Good understanding of Software Development Lifecyle from Requirements to Testing
• Excellent team player to work with cross cultural teams
• Should be able to take ownership of assignments
• Excellent time management skill
• Experience in configuration management tool Git, SVN, or others

Education Qualification

Bachelor’s or master’s degree in Computer Science or Electrical or Electronics Engineering

Years of experience

1 to 5 years

Work Location

Bangalore

Position

4

Key skills/Job Responsibilities

• Experience in Embedded C or C++ programming
• Good understanding of communication protocols such as Ethernet , UART, I2C and SPI
• Experience in embedded software development involving Microcontrollers/SoC
• Experience in Baremetal /RTOS environment
• Strong board bring up and debugging Skills
• Strong Presentation and Documentation Skills
• Must be able to research and solve complex design problems
• Must have ability to work independently as well as a team member
• Knowledge in reading schematics and datasheets of the components is preferred
• Job role involves performing firmware development and testing in Baremetal/RTOS environments

Education Qualification

Bachelor’s or master’s degree in Computer Science or Electrical or Electronics Engineering

Years of experience

7 to 10 years

Work Location

Bangalore

Position

4

Key skills/Job Responsibilities

• 7+ years of V&V experience - mandatory
• DO178C DAL A V&V experience (MCDC), DO-330 knowledge - mandatory
• Very good in python scripting, exp in developing test tools is advisable
• LDRA tool exp in unit testing as well as integration testing - mandatory
• HSIT and Unit testing exp is a must - mandatory
• Should have participated in SOI/QA reviews
• Very good communication skills both written and spoken - mandatory
• Object code analysis and/or compiler validation exp
• Data coupling and control coupling analysis, worst case execution analysis, memory margin analysis, stack analysis, code coverage analysis - mandatory
• Regression testing
• Should be able to tweak the test rig for the project needs
• Exp in GIT and SVN configuration management
• Strong analysis skills - mandatory

Education Qualification

BE/BTech (CSE, IT, Electrical & Electronics)

Years of experience

2 to 5 years

Work Location

Bangalore

Position

10

Key skills/Job Responsibilities

• Experience with embedded software development using C/C++
• Good Troubleshooting skills
• Familiarity with Software Architecture, Detailed design, Traceability

Desirable

• Experience with embedded interfaces UART, SPI, ADC, LIN, EEPROM
• Experience with functional safety standards DO-178C or ISO 26262 Part 6
• Development experience with CAN stacks, ISO 15765, J1939, CAN open
• Good interpersonal skills, flexibility, and passion for product development is desirable.

Employment Type

Regular / Permanent.

Selection Process

Online/F2F interviews + HR interviews (Shortlisted)

Education Qualification

BE/BTech (CSE, IT, Electrical & Electronics)

Years of experience

6 - 10 years experience in Embedded System Development

Work Location

Bangalore

Position

5

Experience

• Experience with embedded software development using C/C++
• Good Troubleshooting skills
• Familiarity with Software Architecture, Detailed design, Traceability

Desirable

• Experience with embedded interfaces UART, SPI, ADC, LIN, EEPROM
• Experience with functional safety standards DO-178C or ISO 26262 Part 6
• Development experience with CAN stacks, ISO 15765, J1939, CAN open
• Good interpersonal skills, flexibility, and passion for product development is desirable.

Employment Type

Regular / Permanent.

Selection Process

Online/F2F interviews + HR interviews (Shortlisted)

Education Qualification

BE/BTech (CSE, IT, Electrical & Electronics)

Years of experience

2 to 5 years

Work Location

Bangalore

Position

5

Key skills/Job Responsibilities

• Very Good understanding of Microprocessor/ Microcontroller Architecture (ARM/Intel/AMD)
• Very Good understanding of communication interfaces like UART, Ethernet, SPI, I2C etc.,
• Experience of Linux Boot up sequence/ BSPs and board bring up activities
• Experience in Linux Kernel and Device Driver Development
• Application development in an embedded Linux environment in C or C++.
• Experience in building Linux Kernel using BuildRoot/Yacto
• Very Good understanding of Software Development Lifecyle from Requirements to Testing
• Excellent team player to work with cross cultural teams
• Should be able to take ownership of assignments
• Excellent time management skill
• Experience in configuration management tool Git, SVN, or others

Education Qualification

Bachelor of Engineering (BTECH / BE) or Masters (MTECH / MS) Electronics & Communication / Telecommunication

Years of experience

5 to 10 years

Work Location

Bangalore

Position

2

Job Description

Essential

• Experience in Software Design and Development activities (creating software requirements, design, coding, etc.)
• Strong programming and analyzing skills in C programming language.
• Working knowledge of DO-178B/C Standards and processes in Real Time, Safety Critical Application in Aerospace Domain
• Good written and oral communication skills

Desirable : On hand Working Knowledge of

• Knowledge of any IDE (preferably Eclipse)
• IBM Rational Tool Chain: DOORS
• Knowledge of GDB or any other debugging tools
• Knowledge in development of any one of communication protocols such as A429, CAN, A825, RS-232, RS-422
• Experience in different phases of Software Development Life Cycle activities
• Knowledge of TortoiseSVN or any Configuration management tool and Defect Tracking tools
• Assembly Languages for ARM Cortex-M processors

Employment Type

Regular / Permanent.

Selection Process

Online/F2F interviews + HR interviews (Shortlisted)

Education Qualification

Bachelor's degree in Electronics, Automobile or Mechanical Engineering

Years of experience

2-5 years of relevant experience, preferably in Design & Release

Work Location

Bangalore

Position

5

Skills

Power electronics, Understanding of Electrical engineering standards, Knowledge in CANanalyzer/CANoe, DVP & R and DFMEA creation and execution, Knowledge of Engineering Drawings and CAD [CATIA/AUTOCAD/NX CAD].Experience with supplier program management [Preferred]. Familiarity with process improvement methodology, Product Data Management. Strong analytical and problem-solving skills. Excellent Documentation, written and verbal communication skills. Proficiency in MS Office (Excel, Word, PowerPoint)

Soft Skills

Customer Focus, Effective communication and email writing skills, Drive for Results, Building Effective Teams, Interpersonal Skills.

Job Description

• Develop and maintain efficient and cost effective power electronics and associated software using cutting edge technologies.
• Develop power electronic devices DVP&R and define and carry out all required development/validation testing to ensure achievement of all functional objectives and assure compliance to program goals.
• Participate in supplier assessments and post-test inspection reviews, including detailed failure analysis.
• Standardization and harmonization of Legacy models for upcoming model years.
• Documents and supervises new changes incorporated in the legacy models for internal team and supplier team with detailed reports of PFMEA, DFMEA and APQP for both hardware and software parts.
• Work closely with chosen suppliers and manufacturing entities to ensure designs are robust to customer requirements, meet exact function and are manufactured without defects.
• Test finished product for quality purposes and recommends changes to product specifications as necessary.
• Coordinating with respective stake holders such as supplier Quality, Suppliers, Engineering team and Design release Engineers to resolve issues.

Employment Type

Regular / Permanent.

Selection Process

Online/F2F interviews + HR interviews (Shortlisted)

Education Qualification

BE/BTech – EC/ EE /Telecommunication

Years of experience

3 to 5 years

Work Location

UK

Working conditions and travel flexibility

• Must be flexible, as job may require working outside the normal working hours or shift work
• Ability to take on any task required to satisfy customer requirements
• Flexible to travel and stay for longer duration across various locations in UK

Key skills/Job Responsibilities

• Must have strong experience in complete Hardware development life cycle as per DO254 (Technical feasibility, requirements, preliminary and detailed design, prototype manufacturing, test and evaluation, qualification and certification)
• Should have experience in the IVVQ (Integration, Verification, Validation and Qualification) including requirements management
• To be able to follow departmental, quality and Health & Safety procedures
• Design and testing of automated test equipment's used in avionic products
• To be able to assist in the qualification of test equipment's
• Must have good experience in bench test set-up, functional testing and performance evaluation.
• Produce investigation reports and Statement of work
• Provide assistance to Engineering with investigation units
• Provide Technical assistance to Internal and External customer
• Must have experience in developing Qualification Test procedures (QTPs), Qualification Test Reports (QTR), Qualification by similarity reports (QBSR) and other documents required by certification authorities
• Responsible for providing regular updates to meet the needs of each customer regarding the status of the units
• Demonstrate a level of innovation within the cell to assist continuous improvements
• Must have experience in interfacing with external test facilities for environmental and EMI/EMC and other electrical tests as per MIL-STD and DO-160 standards
• Perform Inspection on all activities as and when required

System Engineer Qualifications / Skills:

• Excellent oral and written communication skills
• Decision-making
• Analytical skills
• Knowledge of systems engineering software tools
• Leadership Qualities
• To work as a proactive team member of a nominated department
• To be able to communicate effectively with the customers and provide Technical support with Engineering on Development products
• Should be responsible for providing regular updates to meet the needs of each customer regarding the status of the projects

Education Qualification

B.E/B.Tech or M.Tech in C.Sc/ ECE/ EEE

Years of experience

1 to 3 years

Key skills/JD

• Experience in Software Design and Development activities (creating software requirements, design, coding, etc.)
• Experience in Verification and Validation (V & V) activities (Low Level Testing (Unit Testing) or Hardware Software Integration Testing (HSIT)
• Strong programming and analyzing skills in C or C++ programming language
• Experience in Ada programming language (Ada Compiler)
• For V & V, experience in testing using testing tool (LDRA Tool Suite or RTRT), requirement based testing, structural coverage analysis and debugging
• Working knowledge of DO-178B or DOD STD 2167A Standards and processes in Real Time, Safety Critical / Mission Critical Application in Aerospace or Nuclear or Railways Domain
• Good written and oral communication skills

No. of positions

7

Education Qualification

BE/BTech – CS/ IS /IT

Years of experience

10 to 18 years

Work Location

UK

Working conditions and travel flexibility

• Must be flexible, as job may require working outside the normal working hours or shift work
• Ability to take on any task required to satisfy customer requirements
• Flexible to travel and stay for longer duration across various locations in UK

Key skills/Job Responsibilities

• Development and Testing activities for Avionics software as per DO-178C
• To competently attempt to resolve technical problems associated with assigned products
• Responsible for Prototype Development and Testing of Avionics software
• Responsible for Development of Architecture, Design and Source code of Avionics software.
• Responsible for different phases of Avionics software testing - Hardware Software Integration Testing, Software Integration testing and Low-level testing.
• Responsible for customer interaction, project status/timeline and to meet end needs of the customer.
• Responsible for development of Embedded Software.
• To be able to assist in Certification Activities of Avionics software.
• To be able to assist in the development of Automated Test Environment for Avionics software testing.
• To be able to assist in software configuration management.
• Familiarity with design and analysis and test techniques for safety critical real time software
• Familiarity with DO-178C
• To help ensure engineering activity is carried out in accordance with engineering products
• Continuously seek to improve the process and procedures within your area
• To be able to follow departmental, quality and Health & Safety procedures
• Familiar with appropriate standards and process within area
• Some experience with parts of the software lifecycle
• Experience with formal requirements capture, validation and verification
• Design and testing of automated test equipment's used in avionic products
• To be able to assist in the qualification of test equipment's
• Produce investigation reports and Statement of work
• To ensure Repair products and Turnaround time is achieved within 5 days
• Perform Inspection on all activities as and when required
• There may be additional activities to perform from time to time in order to maximise the contribution to customers goals and objectives sites around the world

Software Engineer Qualifications / Skills:

• Excellent oral and written communication skills
• Decision-making
• Analytical skills
• Leadership Qualities
• To work as a proactive team member of a nominated department
• To be able to communicate effectively with the customers and provide Technical support with Engineering on Development products
• Should be responsible for providing regular updates to meet the needs of each customer regarding the status of the projects